BNYHV - 210 SOLDERING FLUX 1245

  • MSDS: BNYHV
  • Manufacturer: GARDINER SOLDER CO
  • Product Name: 210 SOLDERING FLUX 1245
  • National Stock Number: 3439-00F024738
Product Identification

Product ID:210 SOLDERING FLUX 1245
MSDS Date:02/13/1987
FSC:3439
NIIN:00F024738
MSDS Number: BNYHV

Responsible Party
GARDINER SOLDER CO
4820 S CAMPBELL AVE
CHICAGO, IL 60632-1416
US

Emergency Phone: (312) 847-0100

Info Phone: (312) 847-0100

Preparer: TED VAN DER MOLEN

Cage: 56244

Contractor
GARDINER SOLDER CO, DIV OF GARDINER METAL CO
CHICAGO, IL 60632-1416 US

Telephone: 312-847-0100/800-424-9300(CHEMTREC)

Cage: 56244

Ingredients

ISOPROPANOL (ISOPROPYL ALCOHOL), 2-PROPANOL, DIMETHYL

CAS: 67-63-0

RTECS: NT8050000

OSHA PEL 400 PPM

ACGIH TLV: 400 PPM


DIPROPYLENE GLYCOL METHYL ETHER *92-2*

CAS: 20324-32-7


ROSIN ACID *92-2*

CAS: 8050-09-7


KEROSENE (PETROLEUM), HYDROTREATED; PETROLEUM DISTILLATE,

CAS: 64742-47-8

RTECS: OA5504000

Hazards

Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHALATION: IRRITATION OF NOSE,
THROAT, HEADACHE, DIZZINESS, NARCOTIC & IMPAIRED PULMONARY
FUNCTION. INGESTION: MAY GENERATE HEAT & LOWER BLOOD PRESSURE.
SKIN: REMOVES OIL MAKING SKIN DRY & CRACKED. E YES: CORNEAL BURNS,
EYE DAMAGE, IRRITATION.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:INHALATION: IRRITATION OF NOSE, THROAT,
HEADACHE, DIZZINESS, NARCOTIC & IMPAIRED PULMONARY FUNCTION.
INGESTION: MAY GENERATE HEAT & LOWER BLOOD PRESSURE. SKIN: REMOVES
OIL MAKING SKIN DRY & CRACKED. E YES: CORNEAL BURNS, EYE DAMAGE,
IRRITATION.
Medical Cond Aggravated by Exposure:SKIN, LIVER & KIDNEY DISORDERS,
RESPIRATORY DISEASE.

First Aid

First Aid:INHALATION: REMOVE TO FRESH AIR. MALAISE SHOULD BE TRANSIENT.
EYES: WASH W/PLENTY OF WATER & USE ISOTOPIC SOLUTION. SKIN: WASH
W/SOAP & WATER & APPLY HAND CREAM. INGESTION: INDUCE VOMITING BY
TOUCHING BACK OF THROAT W/FINGER. OBTAIN MEDICAL ATTENTION IN ALL
CASES.

Fire Fighting

Flash Point:52F
Lower Limits:2%
Upper Limits:12%
Extinguishing Media:ALCOHOL FOAM, DRY CHEMICAL, CO2
Fire Fighting Procedures:SELF-SUSTAINED BREATHING APPARTUS. KEEP
NON-BURNING CONTAINERS COOL BY DOUSING W/WATER.
Unusual Fire/Explosion Hazard:FIRE DANGER WHEN EXPOSED TO HEAT OR
FLAME. EXPLOSION MODERATE WHEN EXPOSED TO HEAT OR FLAME.
AUTO-IGNITION TEMP: 750F.

Accidental Release

Spill Release Procedures:SMALL-ADD PLENTY OF WATER AT ONE TIME.
LARGE-EXTINGUISH ALL FIRE, OPEN WINDOWS, EVACUATE PEOPLE, ADD
ABSORBENT, LET EVAPORATE. PUT ABSORBENT IN CONTAINER.

Handling

Handling and Storage Precautions:KEEP IN COOL AREA & AWAY FROM SOURCE
OF HEAT. IN HOT WEATHER, OPEN CONTAINER SLOWLY TO LET VAPORS
EXCAPE.
Other Precautions:BARREL & CONTAINERS SHOULD BE GROUNDED TO PREVENT
SPARKS. DON'T SMOKE.

Exposure Controls

Respiratory Protection:NONE REQUIRED AT ROOM TEMP ONLY NORMAL
VENTILATION. DURING A SOLDERING PROCESS, A RESPIRATOR APPROVED BY
NIOSH/MINE SAFETY & HEALTH ADMIN IF GOOD VENTILATION OR EXHAUST IS
NOT AVAILABLE.
Ventilation:RECOMMENDED
Protective Gloves:SOLVENT RESISTANT
Eye Protection:GLASSES W/SIDE SHIELD OR GOGGLES
Other Protective Equipment:EYE BATH, SHOWER, PROTECTIVE CLOTHING
Work Hygienic Practices:LAUNDER CONTAMINATED CLOTHING BEFORE REUSE.
WASH HANDS BEFORE EATING, DRINKING OR SMOKING. SHOWER IF SPILLED ON
SKIN.
Supplemental Safety and Health
DON'T ALLOW PREGNANT WOMEN IN A SOLDERING AREA.

Chemical Properties

Boiling Pt:B.P. Text:181F
Melt/Freeze Pt:M.P/F.P Text:-127F
Vapor Pres:33
Vapor Density:2.7
Spec Gravity:0.885
Evaporation Rate & Reference:(BU AC = 1): 1.7
Solubility in Water:65%
Appearance and Odor:AMBER LIQUID W/ETHEREAL ODOR
Percent Volatiles by Volume:70%

Stability

Stability Indicator/Materials to Avoid:YES
OXIDIZING MATERIAL
Stability Condition to Avoid:HEAT, FLAME
Hazardous Decomposition Products:CO2, CO, VARIOUS HYDROCARBONS & SOOTY
MATTER.

Disposal

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE W/LOCAL, STATE, &
FEDERAL REGULATIONS. FLAMMABLE.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.